A back-bar cooler is squeezed between the counter and the wall, so depth decides whether it fits at all. Ours is built shallow and wide rather than deep and narrow — the cabinet presents more bottle faces per metre of bar and leaves the aisle clear.
Beer service also punishes recovery time. Every door opening dumps cold air; a cabinet sized for a convenience store will take too long to pull back down during a busy service. The condenser and evaporator on this family are sized for repeated door openings, not for a static test room.
Typical installations: bar back-bar, pub, restaurant drinks station, bottle shop, hotel pool bar, catering trailer.
A lit panel across the top turns the cooler into a branded fixture — the reason distributors specify this family for on-premise accounts.
A roller blind inside the glass cuts running cost overnight when the bar is closed, without emptying the cabinet.
Shelf load and front lip set for 500-630 ml glass bottles; wire or flat with dividers.
Evaporator and condenser sized for repeated door openings during service, not for a closed-door test.
Wired and run-tested for the destination market before packing.
Magnetic gasket on all four sides; replaceable without changing the door.
These are the bands we build within. A final model sheet with exact dimensions, volume, refrigerant charge and loading quantity is issued with every quotation.
| Parameter | Standard configuration | Options / notes |
|---|---|---|
| Temperature range | 0 to +10 °C | Adjustable; colder settings for rapid service |
| Doors | 2 / 3 hinged glass | Self-closing, lockable |
| Build | Shallow depth, wide footprint | Sized to sit under or behind a bar counter |
| Header | Light box, printed or blank | Artwork supplied by the buyer |
| Shelves | 3-4 per door, bottle pitched | Load rated for 500-630 ml glass bottles |
| Night curtain | Roller blind inside glass | Standard on this family |
| Cooling | Forced air, auto-defrost | Evaporative condensate tray |
| Refrigerant | R600a / R290 | Confirmed per model and destination |
| Body | Pre-coated steel, black or stainless | Other colours on minimum quantity |
| Voltage | 220-240 V 50 Hz / 110-120 V 60 Hz | 220 V 60 Hz also available |
| HS code | 8418.50 | Display counters, cabinets and similar |
Anything on this list is a configuration, not a new product — which is why it does not need a new mould.
No. This family covers bottle and can display only. Draft systems involve gas, regulators and line cleaning, which is a different trade — we would rather point you elsewhere than half-supply it.
The family is built 0 to +10 °C. For fast-chill service some operators run the low end of that band; tell us if your service needs rapid chill and we will confirm whether the model suits.
Yes — that is the main reason buyers choose this family. Send artwork, and confirm the print method and minimum quantity with your quotation.
Send the counter height and depth before ordering. We will confirm the model dimensions against your opening rather than after the container arrives.
Send the counter height, the bar length and the bottle size you serve. We will confirm which model fits the opening before you commit to a container.
