A beverage cooler is judged by two things the buyer never puts in the specification: whether the glass stays readable, and whether the drinks are actually cold at the front of the top shelf. Both are consequences of airflow and door design, not of compressor size.
This family is a floor-standing cabinet with a glass door, LED lighting on the door pillar, and shelves pitched to the bottle height you sell. It is the highest-volume product we build, which is also why it is the one we have the most field feedback on.
Typical installations: convenience stores, cafe and tea shops, petrol forecourts, hotel lobbies, small supermarkets, beverage distributors who rent cabinets to retailers.
The outer pane carries a low-wattage heater. Without it, a cabinet in 80% relative humidity fogs over within minutes of opening the door.
Cool-white 6500 K or neutral 4000 K. Lit product sells; a single top lamp leaves the bottom shelf in shadow.
Shelf spacing set to the bottle or can height you actually sell, with a price strip on the front edge.
Cold air is circulated to the front of each shelf rather than left to fall down the back wall.
220-240 V 50 Hz, 110-120 V 60 Hz or 220 V 60 Hz, wired and run-tested before packing.
Keyed lock standard. Adjustable feet or castors depending on how the store moves the cabinet.
These are the bands we build within. A final model sheet with exact dimensions, volume, refrigerant charge and loading quantity is issued with every quotation.
| Parameter | Standard configuration | Options / notes |
|---|---|---|
| Temperature range | 0 to +10 °C | Factory set; adjustable by controller |
| Doors | 1 / 2 / 3 hinged glass | Self-closing; left or right hand |
| Gross volume | approx. 200-1,400 L | Depends on door count and height |
| Glass | Double glazed, LOW-E | Heated frame standard on humid-market builds |
| Shelves | 4-5 per door, adjustable | 25 mm pitch, PE coated wire or flat |
| Cooling | Forced air, auto-defrost | Evaporative condensate tray (no drain line) |
| Controller | Mechanical or digital | Digital with temperature display optional |
| Refrigerant | R600a / R290 | Confirmed per model and destination |
| Body | Pre-coated steel; stainless front optional | 201 or 304 stainless on request |
| Insulation | PU foam, cyclopentane blown | Density checked by sample at foaming |
| Voltage | 220-240 V 50 Hz / 110-120 V 60 Hz | 220 V 60 Hz also available |
| HS code | 8418.50 | Display counters, cabinets and similar |
Anything on this list is a configuration, not a new product — which is why it does not need a new mould.
Not with the heated-frame build, which we supply as standard for Southeast Asia, the Gulf and coastal markets. A standard unheated door will fog at roughly 75-80% relative humidity — tell us the destination and we build accordingly.
This family is a chiller, 0 to +10 °C. For frozen product, the four- and six-door upright family is the correct choice. Converting a glass-door display to -18 °C changes glass, gasket and defrost design, so we do not treat it as an option.
Yes — nameplate, light-box graphic and carton print. Silk-screen on the door frame is also possible above the standard minimum quantity.
Confirmed in the quotation, because it depends on door count, voltage build and whether the header is printed. We do not publish a single number that would be wrong half the time.
Tell us the destination, the bottle size and the number of doors. We will send the model range, the loading plan and the configuration that survives your summer.
